Apllied Research Technologie
Digital Preamp DPSII- 2channel
Fantastische 2ch Mic / instr Buizen Pre-Amp met digitale uitgang, ideaal voor gebruik in de studio
The DPS II updates the latest ART advances in Tube Microphone Preamps. The DPS II adds continuously variable input impedance, LED input meters, auto mic/instrument switching, OPL™ (Output Protection Limiting) flexibility and more tube warmth to the DPS II.Twin high performance discrete preamplifiers with local feedback are coupled with our flexible V3™ (Variable Valve Voicing) 12AX7A gain stage (which delivers both flexibility and consistency in settings) and choice of analog and digital outputs. The new enhanced mic preamp can accept +20dB peaks while maintaining over 120dB dynamic range and incredibly low distortion. A LED input meter, monitors the signal level of the input amplifier.The auto-switching input allows the DPS II rear inputs to stay patched in while you use the front panel instrument inputs. A versatile insert loop on each channel provides access for additional signal processing or direct access to our high quality A/D converter. Separate gain controls on analog and digital outputs allow you to optimize the unit for simultaneous applications.Digital outputs include S/PDIF, TOSLINK or ADAT (front panel selectable). The A/D is front panel adjustable from 44.1 to 96K or syncs to ADAT or external word clock (32KHZ to 100KHz). You can patch into any ADAT stream and select which pair (or all) of channels the DPS II transmits.The DPS II also features ART A-to-D digital conversion and ART Tube Technology similar to that of the ART DI/O Preamp System. This ensures that when you are going from the analog preamplification to digital, your signal will be as warm and musical as you decide it to be.
Features Variable Input Impedance 24bit/96KHz A-to-D Conversion Improved V3™ Variable Valve Voicing Presets LED Input Meter Analog Output Meter Enhanced ART Tube Technology Warms the Conversion Automaticly switches between instrument and mic preamp Wide Frequency Response (5hz/50kHz) Enhanced OPL™ Output Protection Limiter Specifications CMRR >75dB (typ. @ 1kHz) Dimensions 5.5"d x 19"w x 1.75"h Dynamic Range >100dB Equivalent Input Noise -129dBu (A weighted, xlr to xlr) Frequency Response 5Hz to 50kHz (+0 to -1dB) Input/Output Connections 1/4" RTS unbalanced. Tip = input, Ring = analog output. 10K Input impedance. 0dBu = digital clip point at input level max. Level control offers full mute at min setting. Sample Rate: Internal Selectable 44.1KHz, 48KHz, 88.2KHz, 96KHz External: Wordclock, ADAT. Wordclock Input: BNC connector, 100 Ohms (terminated), 3.25V p-p min, 25KHz (min) to 105KHz (max) sample rate. Optical Input: ADAT optical Selectable for sample rate locking. Also used as a source of ADAT data to be transmitted on unused ADAT channels. Optical Output: ADAT optical or S/PDIF selectable. ADAT Mode: Contains 24 bit ADAT data arranged DPS CH1 = ADAT odd channel(s), CH2 = even channel(s). Maximum Gain 74dB (inst. input to xlr) Maximum Gain XLR to XLR 80dB Maximum Input Level +19dBu (xlr); +22dBu (inst. input) Maximum Output Level +28dBu (xlr); +22dBu (1/4") Phantom Power +48 volts Total Harmonic Distortion .01% (clean), 0.1% (warm) Vacuum Tube 12AX7A - Dual Triode (Hand Selected) Weight 4.85 lbs. (2.2 kg)
Tube Pre-Amp Projects Serie USB
The Tube MP Project Series USB is a professional quality audio interface that lets you connect microphone, instrument, and line level signals to Computer or DAW With up to 70dB of clean musical gain and high output signal drive capability the cold digital world will melt with your mixes! Charge up your creativity with the Tube MP Project Series USB!
Features Extremely Low Noise Discrete Front End Up to 70dB of Clean, "Musical" Gain High Output Signal Drive Capability Fast FET Limiter to Prevent Overload Switch Selectable Input Impedance Precision LED Metering Built-in Low Noise Phantom Power Supply Compact, Stackable all Aluminum Chassis XLR and 1/4" Inputs and Outputs Phase Invert Switch High Cut Filter Switch Variable Input and Output Controls
Specifications Frequency Response: 10Hz – 40KHz, +/-1 dB (typical) Dynamic Range: >100dB (20Hz to 20KHz) THD: <0.05% (typical) CMRR: >60dB (typical) EIN: <-130dB (XLR to XLR A-weighted) Maximum Input Level: +17dBu (1/4"), +16dBu (XLR) Maximum Output Level: +20dBu (1/4"), +26dBu (XLR) Input Connections: 1/4" TRS unbalanced (1meg Ohm) XLR female balanced Output Connection: 1/4" TRS unbalanced (600 Ohm) XLR male balanced, (<300 Ohm) Maximum Gain: 70dB (XLR - XLR), +50dB (1/4"- XLR) Input Gain Pad: Switchable, 20dB XLR Input Impedance: Switchable, 4.7k Ohms / 600 Ohms Low Cut Filter: Switchable, -3dB @ 40Hz Output Phase: Switchable, Normal/Invert Output Limiter Type: Switchable, Fast & Musical FET limiter, >20dB limit range Phantom Power: Switchable, +48V DC, filtered, current limited Signal Metering: Precise LED array with a fast attack and moderate release Tube Type: 12AX7A hand selected Chassis Type: Aluminum Anodized with integral/stackable rubber sides Power Requirements: 10Volts AC @ 700mA (typical) Dimensions: 1.75"H x 5.9"W x 6.5"D (44.5mm x 150mm x 165mm) Weight: 2.5 lbs. (1.14 kg)
USB (Universal Serial Bus) is a common hardware interface used for quick and easy connection of peripherals like the ART USB TUBE MP. to Any USSb Interconnection on any PC, Mac or other miracles of technologie using USB interface
Tube Mic Pre Amp V3
Perfecte preamp voor microphones en instrumenten V-3 variabele valve voicing & phantom voeding
The Tube MP Studio V3™ single channel mic pre features ART's new V3™ (Variable Valve Voicing) Technology -- found only in ART microphone preamplification systems. V3™ provides optimized reference points to begin the recording process. The V3™ presets were created and fine-tuned by some of the industry's top studio and live-sound engineers, along with our veteran engineering department. V3™ allows you to select between a multitude of preamp settings designed for guitars (electric and acoustic), keyboards, bass guitars, drums, vocals and more. V3™ gives you incredible presets for every instrument you record, so all your recordings will sound professional. Need to tweak the presets? Go right ahead -- hone your perfect tone! That's the power of V3™. V3™ also incorporates ART's OPL™ (Output Protection Limiter), which precisely and accurately controls and maintains the output peak signal. The OPL™ circuitry is crucial in protecting the next link in a signal chain - such as a hard-disk recording system or a sound card. While it's primary application is to be used with a microphone, the Tube MP Studio V3™ can also function as a direct box - impedance matching, amplifying and improving the sound of any instrument plugged into it. The design of the Tube MP Studio V3™ allows it to add warmth and fatness to a signal while maintaining low-noise.
Features Provides Superior Preamplification for: Microphones, Instruments and Line Level Sources V3™ Variable Valve Voicing OPL™ - Output Protection Limiting Warm and Fat Sound Quality Variable Input and Output Gain Controls Excellent as a Tube DI XLR and 1/4" Inputs and Outputs +48 volts +48 Volts of Phantom Power Phase Reversal Switch Superior Sonic Performance to On-Board Preamps TEC-Award Nominated Design Portable, All Steel Construction Dimensions 5.0in D x 5.5in W x 2.0in H Dynamic Range >100dB (20Hz to 20kHz) Equivalent Input Noise -129dBu ('A' weighted XLR to XLR) Frequency Response 10Hz to 20kHz (+0,-1dB) Input Impedance 2k ohms (XLR), 840K ohms (1/4 in.) Maximum Gain 70dB (XLR to XLR typical) Maximum Input Level +14dBu (XLR), +22dBu (1/4 in.) Maximum Output Level +28dBu (XLR), +22dBu (1/4 in.) Output Impedance 600 ohms (XLR), 300 ohms (1/4 in.) Phantom Power +48 Volts Power Requirements 9 VAC @ 700ma (typ) Total Harmonic Distortion <0.1% (typical) >CMMR: >75dB (typ @1kHz) Tube Type Hand Selected 12AX7A, provides over 70dB of Gain Weight 1.5 lbs.
Tube Pre-Amp Projects Serie
The Tube MP Project Series is a professional quality audio interface that lets you connect microphone, instrument, and line level signals to a mixer or other audio input. With up to 70dB of clean musical gain and high output signal drive capability the cold digital world will melt with your mixes! Charge up your creativity with the Tube MP Project Series!
