Mojave MA-100 FET Small-diaphragm Condenser Microphone

Ampt-MA100 mojave
Nu slechts
kg
    Levertijd:1-2 dagen
Bestel
  • Beschrijving
  • Meer

Mojave MA-100 FET Small-diaphragm Condenser Microphone

Small Diaphragm - Big Sound!

The MA-101FET is a small diaphragm, solid-state condenser microphone with interchangeable cardioid and omnidirectional capsules. Designed by renowned microphone designer David Royer, the MA101fet combines the features of two of Mojave Audio's popular models - the cardioid and omnidirectional capsules from the MA-100 with the electronics from the MA-201fet. New to the MA-101fet is an internally switchable -15dB pad, increasing the headroom to an ear shattering 135dB SPL. This makes the MA-101fet suitable for everything from capturing the subtle nuances of acoustic instruments to the loudesst of electric guitars and drums - great for location recording, too.

Featuring hand selected, 3-micron cardioid and omni capsules, a high quality Jensen audio transformer and military-grade FET and custom designed low noise resistors; the MA-101fet is designed to offer excellent performance for a wide variety of applications. Each MA-101fet microphone is carefully tested and evaluated, then packaged in its protective case.

Features
Interchangeable cardioid and omnidirectional hand-selected 3-micron capsules
Internally switchable -15dB attenuator
Jensen audio transformer
Military-grade FET
Custom designed low-noise resistors
Ultra clean signal path
Recommended applications

Acoustic Instruments
Location Recording
High SPL sources, such as Kick Drums and Bass Guitar Amps
Electric Guitars
Piano
Snare Drums, Toms, Drum Overheads
Guitar Amplifiers
Piano
Stereo Pairs (X/Y, MS, etc.)
Decca Tree
Orchestral Recording
Choral Recording
Voice-overs and Broadcast
Percussion

TECHNICAL DATA
Capsules: Interchangeable Cardioid and Omnidirectional
Diaphragm: .8" (20.5 mm) diameter
Diaphragm thickness: 3-micron
Frequency Response: 20 Hz - 20 kHz +/- 2.5 dB
Sensitivity: -39 dB re.1V/pa +/- 1.5 dB
Maximum SPL: 125 dB pad off, 140dB pad on.
Distortion: <1% @ 120dB pad off, <1 % @ 135dB pad on
Self Noise: 14 dB nominal, not to exceed 16 dB (A weighted)
Impedance: 550 ohms, transformer balanced (Jensen)
Power Requirements: 48VDC phantom power; .68 mA wall current

DIMENSIONS AND WEIGHT:
Carrying Case with microphone: 8.3" x 6.7" x 3.3" (21 x 17 x 8.5 cm), weight 1.8 lbs, (0.82 KG)
Microphone: 6.75" x 1.12", weight 8 oz